Saturday, September 26, 2015

Zitrades Motion Sensor Night Light Review (Tomoson)

Disclaimer: This post contains Amazon Affiliate Links.


A video posted by Stacie D Wyatt (@sdwyatt1980) on



I received Zitrades Motion Sensored Night Light in exchange for honest review from Tomoson. The light runs on 4 AA batteries. You can either turn it on via the button at the bottom (high and low light) plus the motion sensor light. To use the motion sensor light, it must be completely dark around the light. I been noticing after 9 is the best time. At first, I wasn't sure if it worked or not. Then,a few days ago, I went to the potty and viola, the light came on. Luckily, it doesn't pick up on the light from the bathroom. I usually leave the light on at night because I lock the bathroom door and need to see how to open it.

The hardest part was installing the light on the wall. Luckily, the battery compartment slides off. I marked the locations with a hole, using the screwdriver. Next, I worked the screw driver in the hole until it was big enough to handle an anchor screw. Finally, I screwed the battery compartment into the wall first, then slid the light unit onto the battery compartment. Trying to install the night light as a whole unit was too much of a challenge. You also have the option of using the 3m double sided tape as an option as well, if you want a no drill/no screwdriver installation.

You can purchase the night light, using the link above. The night light is prime-eligible.


No comments:

Post a Comment

Please leave a comment. Thank you. Stacie